Merkury is a smart Wi-Fi camera that you can integrate into your smart home security system to help you see what is happening on your property. You must connect your Merkury camera to a Wi-Fi network to get live videos on your smartphone.
A Merkury camera won’t connect to Wi-Fi if you connect it to a 5 GHz network. Another reason could be that your encryption settings aren’t properly configured.
In any case, the procedure for fixing this problem isn’t difficult unless the camera has hardware damage. Here we’ll break down all these troubleshooting tips and how to apply them in order to fix the problem.
Fix 1: Connect the Merkury Wi-Fi camera to a 2.4 GHz Wi-Fi
Merkury Wi-Fi camera, like many smart home gadgets, cannot connect to 5 GHz Wi-Fi. Although 5 GHz Wi-Fi is faster, it has a relatively lower range and object penetration.
The Merkury wi-fi camera supports 2.4 GHz wi-fi only and doesn’t require much bandwidth.
Many routers combine 2.4 GHz and 5 GHz on a single access point. In addition, you can find that some routers allow users to create just one access point for the two bands or separate them into two distinct Wi-Fi with different passwords and names.
You can change your router’s settings via the app if it comes with it. If it does not come with an app, go to your router’s settings and permanently change your frequency band.
Remember to turn 5 GHz back on once you connect your Merkury camera.
Does Merkury Smart Wi-Fi Camera need Wi-Fi?
Yes. You need a 2.4 GHz Wi-Fi connection for your Merkury Smart cameras to function.
When the Wi-Fi is off, the camera also goes offline. It will, therefore, not record to your SD or the cloud.
Fix 2: Change your Wi-Fi router’s encryption settings
If changing your Wi-Fi to 2.4 GHz in the previous step didn’t solve your problem, you should consider changing your encryption settings.
This is because your Merkury Wi-Fi camera may not be compatible with certain encryption modes. You can solve the issue by trying different types of encryptions for your camera.
Fix 3: Connect to the Merkury camera using a different smartphone
Sometimes you may experience difficulty connecting a Merkury camera to Wi-Fi because of problems related to your device.
For example, you can try switching to a different phone if you have one. Or, if you have been using an Android phone to connect to your Merkury camera, switch to an iPhone instead and try connecting with it.
Fix 4: Restart the Wi-Fi router and your Merkury camera
If your Merkury smart Wi-Fi camera is still not connecting, try restarting both your router and the camera.
As simple as it may sound, unplugging your power cord and waiting for at least 3 minutes before plugging it back in may be the best trick.
This simple act will restart your Wi-Fi and the router before you reestablish the connection.
Fix 5: Press and hold the reset pin on your Merkury camera
Merkury cameras come with a reset button at the back. You can use this reset button to fix your camera if it’s not connecting to your Wi-Fi.
Hold the reset button for some seconds, or at least until you hear the beep sound, then release. When you hear the sound is an indication your attempt to reset was successful.
Fix 6: Connect your Merkury camera using AP mode
The Merkury cameras allow you to connect using easy or AP modes. Accessible mode is frequently used because it’s simpler, but sometimes it does not work.
In such cases, you can try to connect the Merkury camera using the AP mode.
Fix 7: Connect to a different Wi-Fi network
If, even after trying all the above options, you have still not found the solution, then try another router or modem.
The problem could be rooted in your wireless network. You should, therefore, switch to a different network. If you can’t get another Wi-Fi network to connect to, you should create a hotspot from your phone.
